Before checking or servicing in the engine compartment
• Always stop the engine and set the parking brake firmly to prevent the vehicle from moving.
• Always let the engine cool down.
Engine parts become very hot when the engine is running and remain hot for some time after the engine is stopped.
• Do not spill engine oil, engine coolant, brake fluid or any other fluid on hot engine components.
This may cause a fire.
• Always remove the key from the ignition switch. When the ignition switch is in the “ON” position, the cooling fan may operate suddenly even when the engine is stopped.
• Before performing any servicing on a vehicle equipped with a remote engine start system (a dealer option) temporarily place that system in the service mode to prevent it from unexpectedly starting the engine.
See also:
Low tire pressure warning light (U.S.-spec. models)
When the ignition switch is turned to the “ON” position, the low tire pressure
warning light will illuminate for approximately 2 seconds to check that the tire
pressure monitoring system (TPMS) ...
Control panel
Control panel
1) Temperature control dial
2) Fan speed control dial
3) Airflow control dial
4) Control switch of the defogger and deicer system (Refer to “Defogger and
deicer”.)
5) Air inlet se ...
Registering (pairing) device
1. Select the “PAIR AUDIO” menu by operating the “TUNE/TRACK/CH” dial. If a device is already registered, “MEMORY FULL” is displayed and the mode changes to the Bluetooth® audio setting mode.
2. Afte ...