See also:

Map light
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are aligned vertically. Pull the bulb straight downward to r ...

Inspection
Perform the following steps at least twice a year to check the release handle for correct operation. 1. Open the trunk lid. 2. Use a flat-head screwdriver with a thin blade. Slide the flat-head ...

Checking the oil level
1) Yellow handle 1. Park the vehicle on a level surface and stop the engine. 2. Pull out the level gauge, wipe it clean, and insert it again. 1) Upper level 2) Lower level 3. Pull out th ...