Using a warm water washer
• Keep a good distance of 12 in (30 cm) or more between the washer nozzle and the vehicle.
• Do not wash the same area continuously.
• If a stain will not come out easily, wash by hand. Some warm water washers are of the high temperature, high pressure type, and they can damage or deform the resin parts such as moldings, or cause water to leak into the vehicle.
See also:
Trunk light (Legacy)
1. Push both sides of the light cover, and then remove the cover by pulling it
out.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall the cover. ...
Synthetic oil
You should use synthetic engine oil that meets the same requirements given for
conventional engine oil. When using synthetic oil, you must use oil of the same
classification, viscosity and grade s ...
Display selection
Select an indication in the same way that an indication is selected when a CD is played. Refer to “Display selection”. Each time you briefly press the “TEXT” button, the indication changes in the foll ...