To temporarily cancel the cruise control

The cruise control can be temporarily canceled in the following ways.

• Push the “CANCEL” button.

• Push the “CANCEL” button.

• Depress the brake pedal.

• Depress the clutch pedal (MT models only).

• Shift the select lever into the “N” position (AT models only).

• Shift the shift lever into the neutral position (MT models only).

The cruise control set indicator light on the combination meter turns off when the cruise control is canceled.

To resume the cruise control after it has been temporarily canceled and with vehicle speed of approximately 20 mph (32 km/h) or more, push the “RES/ACC” button to return to the original cruising speed automatically.

To resume the cruise control after it has been temporarily canceled and with vehicle speed of approximately 20 mph (32 km/h) or more, push the “RES/ACC” button to return to the original cruising speed automatically.

The cruise control set indicator light on the combination meter will automatically illuminate at this time.

    See also:

    Seatbelt warning light and chime
    NOTE If your seatbelt warning device does not operate as described in the following, it may be out of order. Have the device inspected and, if necessary, repaired by the nearest SUBARU dealer. Y ...

    Floor mat (if equipped)
    Floor mat (if equipped) Retaining pins are located on the driver’s side floor. The floor mat is secured using the built-in grommets, by placing the grommets over the pins and pushing them downward. ...

    Hill start assist system (MT models)
    Ensure that the Hill start assist system operates properly under the following circumstances: 1. Stop the vehicle on an uphill grade by depressing the brake pedal and clutch pedal, with the ...