Remote keyless entry system
• Do not expose the remote transmitter to severe shocks, such as those experienced as a result of dropping or throwing.
• Do not take the remote transmitter apart except when replacing the battery.
• Do not get the remote transmitter wet. If it gets wet, wipe it dry with a cloth immediately.
• When you carry the remote transmitter on an airplane, do not press the button of the remote transmitter while in the airplane.
When any button of the remote transmitter is pressed, radio waves are sent and may affect the operation of the airplane.
When you carry the remote transmitter in a bag on an airplane, take measures to prevent the buttons of the remote transmitter from being pressed.
• FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Two transmitters are provided for your vehicle.
The remote keyless entry system has the following functions.
• Locking and unlocking the doors (and rear gate on the 5-door) without a key
• Unlocking the rear gate on the 5-door without a key
• Opening the trunk lid on the 4-door without a key
• Sounding a panic alarm
• Arming and disarming the alarm system.
For detailed information, refer to “Alarm system”
The operable distance of the remote keyless entry system is approximately 30 feet (10 meters). However, this distance will vary depending on environmental conditions. The system’s operable distance will be shorter in areas near a facility or electronic equipment emitting strong radio waves such as a power plant, broadcast station, TV tower, or remote controller of home electronic appliances.
The remote keyless entry system does not operate when the key is inserted in the ignition switch.
: Trunk lid/rear gate unlock
button
: Unlock/disarm button
: Lock/arm button
A: Panic button
1) Front
2) Back
NOTE
• The turn signal lights will flash once/ twice under the following conditions.
– When locking the doors
– When unlocking the doors
– When opening the trunk lid (4- door models)
– When unlocking the rear gate (5- door models)
• The setting of the turn signal light operation can be changed by your SUBARU dealer. Contact your SUBARU dealer for details. Also, for models with the genuine SUBARU navigation system, the setting can be changed using the navigation system. For details, please refer to the Owner’s Manual supplement for the navigation system.
See also:
Vehicle Dynamics Control OFF indicator light
The light illuminates when the ignition switch is turned to the “ON” position
and turns off after approximately 2 seconds. The light illuminates when the Vehicle
Dynamics Control OFF switch is p ...
Registering speed dial
1. After registering phonebook data, select the “SPEED DIAL” menu.
Preset buttons
2. Press the preset button in which you want to register the phone number.
NOTE
If the number to be used is alread ...
Battery drainage prevention function
If a door or the rear gate (Outback) is not completely closed, the interior lights
will remain illuminated as a result. However, several lights are automatically turned
off by the battery drainage ...