Vehicle Dynamics Control system
Always use the utmost care in driving – overconfidence because you are driving a vehicle with the Vehicle Dynamics Control system could easily lead to a serious accident.
- Even if your vehicle is equipped with Vehicle Dynamics Control system, winter tires should be used when driving on snow-covered or icy roads; in addition, vehicle speed should be reduced considerably. Simply having a Vehicle Dynamics Control system does not guarantee that the vehicle will be able to avoid accidents in any situation.
- Activation of the Vehicle Dynamics Control system is an indication that the road being travelled on has a slippery surface; since having Vehicle Dynamics Control is no guarantee that full vehicle control will be maintained at all times and under all conditions, its activation should be seen as a sign that the speed of the vehicle should be reduced considerably.
- Whenever suspension components, steering components, or an axle are removed from a vehicle, have an inspection of that system performed by an authorized SUBARU dealer.
- The following precautions should
be observed in order to ensure
that the Vehicle Dynamics Control
system is operating properly:
– All four wheels should be
fitted with tires of the same
size, type, and brand. Furthermore,
the amount of wear
should be the same for all
four tires.
– Keep the tire pressure at the proper level as shown on the vehicle placard attached to the driver’s side door pillar.
– Use only the specified temporary spare tire to replace a flat tire. With a temporary spare tire, the effectiveness of the Vehicle Dynamics Con- trol system is reduced and this should be taken into account when driving the vehicle in such a condition.
- If non-matching tires are used, the Vehicle Dynamics Control system may not operate correctly.
- The Vehicle Dynamics Control system helps prevent unstable vehicle motion such as skidding using control of the brakes and engine power. Do not turn off the Vehicle Dynamics Control system unless it is absolutely necessary.
If you must turn off the Vehicle Dynamics Control system, drive very carefully according to the road surface condition.
In the event of wheelspin and/or skidding on a slippery road surface and/or during cornering and/or an evasive maneuver, the Vehicle Dynamics Control system adjusts the engine’s output and the wheels’ respective braking forces to help maintain traction and directional control.
- Traction Control Function
The traction control function is designed to prevent spinning of the driving wheels on slippery road surfaces, thereby helping to maintain traction and directional control.
Activation of this function is shown by steady illumination of the Vehicle Dynamics Control operation indicator light.
- Skid Suppression Function
The skid suppression function is designed to help maintain directional stability by suppressing the wheels’ tendency to slide sideways during steering operations. Activation of this function is shown by flashing of the Vehicle Dynamics Control operation indicator light.
NOTE
- The Vehicle Dynamics Control system
may be considered normal when
the following conditions occur.
– Slight twitching of the brake pedal is felt.
– The vehicle or steering wheel shakes to a small degree.
– An operating sound from the engine compartment is heard briefly when starting the engine and when driving off after starting the engine.
– The brake pedal seems to jolt when driving off after starting the engine.
- In the following circumstances, the vehicle may be more unstable than it feels to the driver. The Vehicle Dynamics Control System may therefore operate. Such operation does not indicate a system malfunction.
– on gravel-covered or rutted roads
– on unfinished roads
– when the vehicle is fitted with
snow tires or winter tires
- Activation of the Vehicle Dynamics
Control system will cause operation of
the steering wheel to feel slightly
different compared to that for normal
conditions.
- It is always important to reduce speed when approaching a corner, even if the vehicle is equipped with Vehicle Dynamics Control.
- Always turn off the engine before replacing a tire. Failure to do so may render the Vehicle Dynamics Control system unable to operate correctly.
See also:
PTY (Program type) group tuning (only FM reception)
Type A and B audio
Type C audio
Press the “PTY/CAT” button to change to the PTY selection mode. At this time, the PTY group that you are currently listening to will be displayed for 10 seconds. In t ...
Safety
Still think you can't have it all? Check out the Impreza's crash tests, which
at the time of publication are the best in the Insurance Institute for Highway
Safety's Small Car class, with top scor ...
Engine oil
For the checking, adding and replacing procedure or other details, refer to
“Engine oil”.
NOTE
The procedure for changing the engine oil and oil filter should be performed by
a properly-trained ...