Selecting language
To select the language, perform the following procedure.
1. Select the “SEL LANGUAGE”/“SELECT LANGUAGE” menu.
2. Select the desired language by operating the “TUNE/TRACK/CH” dial.
See also:
AT OIL TEMP warning light (AT models)
If this light illuminates when the engine is running, it may indicate that the automatic transmission fluid temperature is too hot.
If the light illuminates while driving, immediately stop the vehi ...
To engage the service mode
Turn the ignition switch to the “ON” position, depress and hold the brake pedal, then press and release the “” button on the remote engine start transmitter three times. The system will pause for 1 se ...
Changing the coolant
WARNING
Never attempt to remove the radiator cap until the engine has been shut off and
has cooled down completely. Since the coolant is under pressure, you may suffer
serious burns from a spray ...
