Subaru Outback (BR): Breaking-in of new brake pads and linings
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Replacement of brake pad and lining / Breaking-in of new brake pads and linings
When replacing the brake pad or lining, use only genuine SUBARU parts. After replacement, the new parts must be broken in as follows:
READ NEXT:
Brake pad and lining
While maintaining a speed of 30 to 40 mph (50 to 65 km/h), step on the brake
pedal lightly. Repeat this five or more times.
Parking brake lining
The break-in maintenance for the parking brake linings should be performed at
a SUBARU dealer.
SEE MORE:
Fuses
CAUTION
Never replace a fuse with one having a higher rating or with material other than
a fuse because serious damage or a fire could result.
The fuses are designed to melt during an overload to prevent damage to the wiring
harness and electrical equipment. The fuses are located in two fuse b
Transfer Clutch
A: REMOVAL
1) Remove the transmission assembly from the vehicle. <Ref. to CVT-55,
REMOVAL, Automatic Transmission
Assembly.>
2) Remove the extension case. <Ref. to CVT-138, REMOVAL, Extension Case.>
3) Remove the rear drive shaft. <Ref. to CVT-141, REMOVAL, Rear Drive Shaft.>
4
© 2010-2024 Copyright www.suoutback.com
