Subaru Outback (BR): Recommended grade and viscosity
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Engine oil / Recommended grade and viscosity
CAUTION
Use only engine oil with the recommended grade and viscosity.
NOTE
Engine oil viscosity (thickness) affects fuel economy. Oils of lower viscosity provide better fuel economy. However, in hot weather, oil of higher viscosity is required to properly lubricate the engine.
READ NEXT:
Synthetic oil
You should use synthetic engine oil that meets the same requirements given for
conventional engine oil. When using synthetic oil, you must use oil of the same
classification, viscosity and grade s
Cooling system
WARNING
Never attempt to remove the radiator cap until the engine has been shut off and
has cooled down completely. Since the coolant is under pressure, you may suffer
serious burns from a spray
Cooling fan, hose and connections
Your vehicle employs an electric cooling fan which is thermostatically controlled
to operate when the engine coolant reaches a specific temperature.
If the radiator cooling fan does not operate eve
SEE MORE:
Main fuse
Main fuse box
The main fuses are designed to melt during an overload to prevent damage to the
wiring harness and electrical equipment. Check the main fuses if any electrical
component fails to operate (except the starter motor) and other fuses are good.
A melted main fuse must be replaced.
Vehicle load limit – how to determine
The load capacity of your vehicle is determined by weight, not by available cargo
space. The load limit of your vehicle is shown on the vehicle placard attached to
the driver’s side B-pillar. Locate the statement “The combined weight of occupants
and cargo should never exceed XXX kg or XXX
© 2010-2024 Copyright www.suoutback.com
