Subaru Outback (BR): When checking or servicing in the engine compartment (2.5 L non-turbo models)
CAUTION
Do not contact the belt cover while checking the components in the engine compartment.
Doing so may cause your hand to slip off the belt cover and result in an unexpected
injury.
READ NEXT:
WARNING
A running engine can be dangerous. Keep your fingers, hands, clothing, hair and
tools away from the cooling fan, belts and any other moving engine parts. Removing
rings, watches and ties
Some clips and fender linings must be removed before replacing the air cleaner
elements or specific bulbs.
Removing clips
There are several types of clips used for your vehicle
Type A clips
1. Turn the clips counterclockwise using a flat-head screwdriver until the center
portion of the clip is raise
SEE MORE:
A: REMOVAL
1. CENTER PANEL ASSY
1) Attach the protective tape (a) to the meter visor.
2) Remove the center panel assembly.
CAUTION:
Do not put your finger on the fin of the air vent grille. Doing so may damage
the fin.
Attach the protective tape (a) to the meter visor.
Insert a finger into t
A: REMOVAL
1. SEDAN MODEL
1) Disconnect the ground cable from battery.
2) Release the lock and remove the bulb inspection cover of trunk room trim.
3) Remove the bulb socket and back-up light bulb.
2. OUTBACK MODEL
1) Disconnect the ground cable from battery.
2) Release the claws and remove the
© 2010-2024 Copyright www.suoutback.com