Subaru Outback (BR): Trailer lights
CAUTION
Direct splicing or other improper connection of trailer lights may damage your vehicle’s electrical system and cause a malfunction of your vehicle’s lighting system.
Connection of trailer lights to your vehicle’s electrical system requires modifications to the vehicle’s lighting circuit to increase its capacity and accommodate wiring changes. To ensure the trailer lights are connected properly, please consult your SUBARU dealer. Check for proper operation of the turn signals and the brake lights each time you hitch up.
READ NEXT:
Tires and towing
Do not attempt to tow a trailer using the temporary spare tire. The temporary spare tire is not designed to handle the towing load and using it for towing can lead to tire failure or reduced vehicle s
Trailer towing tips
CAUTION
● Never exceed 45 mph (72 km/h) when towing a trailer in hilly country on hot
days.
● When towing a trailer, steering, stability, stopping distance and braking performance
wi
Before starting out on a trip
● Check that the vehicle and vehicle-tohitch mounting are in good condition.
If any problems are apparent, do not tow the trailer.
● Check that the vehicle sits horizontally with the tr
SEE MORE:
Selecting audible signal operation
Using an electronic chirp, the system will give you an audible signal when the
doors lock and unlock. If desired, you may turn the audible signal off.
To deactivate the audible signal, perform the following procedure. You can also
use the same steps to restore the function.
1. Sit in the drive
Front Side Marker Light Bulb
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the clips and remove the air intake duct. (When removing the front
turn signal light bulb RH)
3) Turn the steering wheel in the opposite direction to the headlight to be
removed. Then remove the clips
and turn over the mud guard.
© 2010-2024 Copyright www.suoutback.com
