Subaru Outback (BR): Fuel economy hints
The following suggestions will help to save your fuel.
● Select the proper gear position for the speed and road conditions.
● Avoid sudden acceleration or deceleration. Always accelerate gently until you reach the desired speed. Then try to maintain that speed for as long as possible.
● Do not pump the accelerator and avoid racing the engine.
● Avoid unnecessary engine idling.
● Keep the engine properly tuned.
● Keep the tires inflated to the correct pressure shown on the tire placard, which is located under the door latch on the driver’s side. Low pressure will increase tire wear and fuel consumption.
● Use the air conditioner only when necessary.
● Keep the front and rear wheels in proper alignment.
● Avoid carrying unnecessary luggage or cargo.
● The indication of the ECO gauge shows a reference for saving fuel. For details, refer to “ECO gauge” F3-8.
READ NEXT:
Engine exhaust gas (carbon monoxide)
WARNING
● Never inhale engine exhaust gas. Engine exhaust gas contains carbon monoxide,
a colorless and odorless gas which is dangerous, or even lethal, if inhaled.
● Always properly m
Catalytic converter
WARNING
● Avoid fire hazards. Do not drive or park the vehicle anywhere near flammable
materials (e.g. grass, paper, rags or leaves), because the catalytic converter operates
at very high t
Periodic inspections
To keep your vehicle in the best condition at all times, always have the recommended
maintenance services listed in the maintenance schedule in the “Warranty and Maintenance
Booklet” performed
SEE MORE:
Shift lock release using the shift lock release button
Perform the following procedure to release the shift lock.
1. Apply the parking brake and stop the engine.
2. Remove the shift lock cover using a flat-head screwdriver.
3. While depressing the brake pedal, insert the electronic parking brake release
tool into the hole, press the shift lock
Floor mat
Retaining pins are located on the driver’s side floor.
The floor mat is secured using the built-in grommets, by placing the grommets
over the pins and pushing them downward.
CAUTION
Make sure the driver’s floor mat is placed back in its proper location and correctly
secured on its ret
