Subaru Outback (BR): Shifting speeds
Subaru Outback (BR) 2010-2015 Owners Manual / Starting and operating / Manual transmission / Shifting speeds
READ NEXT:
Recommended shifting speeds
The best compromise between fuel economy and vehicle performance during normal
driving is ensured by shifting up at the speeds listed in the following table.
Maximum allowable speeds
WARNING
When shifting down a gear, ensure that the vehicle is not travelling at a speed
exceeding the Maximum Allowable Speed for the gear which is about to be selected.
Failure to observe this p
Driving tips when using a manual transmission
Do not drive with your foot resting on the clutch pedal and do not use the clutch to hold your vehicle at a standstill on an upgrade. Either of those actions may cause clutch damage.
Do not drive w
SEE MORE:
Engine Mounting
A: REMOVAL
1) Change the front hood damper mounting position
from (A) to (B), and completely open the front
hood.
Tightening torque:
20 N*m (2.0 kgf-m, 14.8 ft-lb)
2) Disconnect the ground cable from battery.
3) Remove the radiator main fan motor assembly
and radiator sub fan motor assembly. <R
Speed Control Systems
General Description
A: SPECIFICATION
B: COMPONENT
Accelerator pedal ASSY
Clip
Accelerator plate
Accelerator stopper
Tightening torque: N*m (kgf-m, ft-lb)
T: 18 (1.8, 13.3)
C: CAUTION
Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when performing
© 2010-2024 Copyright www.suoutback.com
