Subaru Outback (BR): When “PUSH EJECT” is displayed
Press the eject button to unload the disc. Check the disc for damage or deformation,
and also check that the correct disc is inserted. Do not try to unload the disc
forcibly. Single CDs (i.e., 8 cm/3 inch CDs) are not supported, and if inserted,
they will be immediately ejected. If the disc cannot be unloaded or this message
remains displayed, please contact your SUBARU dealer.
READ NEXT:
Press the eject button to unload the discs. Check that the disc is not damaged
or scratched, and also check that the disc is inserted correctly. This message may
appear when using some CD-RW discs
By connecting a commercial audio product to the vehicle, such as a portable audio
player, you can hear its sound via the vehicle’s speaker.
An auxiliary (AUX) input jack is equipped in the cent
Use only compact discs (CDs, CD-Rs and CD-RWs) that have the mark shown in the
following illustration. Also, some compact discs cannot be played.
● You cannot use a DualDisc in the CD pla
SEE MORE:
To change from low beam to high beam, push the turn signal lever forward. When
the headlights are on high beam, the high beam indicator light “”
on the combination meter is also on.
To switch back to low beam, pull the lever back to the detent position.
1) Support
1. Grasp the locked end of the blade rubber assembly and pull it firmly until
the stoppers on the rubber are free of the support.
1) Metal spines
2. If the new blade rubber is not provided with two metal spines, remove the
metal spines from the old blade rubber and install them
© 2010-2024 Copyright www.suoutback.com