Subaru Outback manuals

Subaru Outback (BR): Auto-dimming mirror with compass and HomeLink® (if equipped)

Subaru Outback (BR) 2010-2015 Owners Manual / Instruments and controls / Mirrors / Auto-dimming mirror with compass and HomeLink® (if equipped)

1) HomeLink® button 1


1) HomeLink® button 1 2) HomeLink® button 2
3) LED
4) HomeLink® button 3
5) Sensor
6) Automatic dimming on/off button 7) Compass display button 8) Compass display

The auto-dimming mirror has an anti-glare feature which automatically reduces glare coming from headlights of vehicles behind you. It also contains a built-in compass and HomeLink® wireless control system.

● By pressing the automatic dimming on/ off button, the automatic dimming function is toggled on or off. When the automatic dimming function is on, the LED indicator will illuminate.

Even with the mirror in the automatic dimming mode, the mirror surface turns bright if the transmission is shifted into reverse. This is to ensure good rearward visibility during reversing.

● By pressing the compass display button, the compass display is toggled on or off. When the compass is on, an illuminated compass reading will appear in the upper right corner of the mirror.

When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing and damage the mirror.

READ NEXT:

 Photosensors

The mirror has a photosensor attached on both the front and back sides. During nighttime driving, these sensors detect distracting glare from vehicle headlights behind you and automatically dim

 Compass zone adjustment

Compass calibration zones 1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and hold the

SEE MORE:

 CVTF Cooler Pipe and Hose

A: REMOVAL CAUTION: Immediately after the vehicle has been running or after idling for a long time, the CVTF will be hot. Be careful not to burn yourself. If the CVTF is spilt over exhaust pipe, wipe it off with cloth to avoid emitting smoke or causing a fire. When removing the CVTF cooler

 Multi function display

1) Multi function display switching knob With the ignition switch in the “ON” position, each successive press of the multi function display switching knob toggles the display in the following sequence.

© 2010-2025 Copyright www.suoutback.com