Subaru Outback manuals

Subaru Outback (BR): Key lock-in prevention function

This function prevents the doors from being locked with the key still in the ignition switch.

READ NEXT:

 Behavior with key lock-in prevention function operational

With the driver’s door open, the doors are automatically kept unlocked even if the front side of the power door locking switch is pressed.

 Behavior with key lock-in prevention function non-operational

● If the lock lever is turned to the rear (“LOCK”) position with the driver’s door open and the driver’s door is then closed with the lock lever in that position, the driver’s door

 Remote keyless entry system

CAUTION ● Do not expose the remote transmitter to severe shocks, such as those experienced as a result of dropping or throwing. ● Do not take the remote transmitter apart except when r

SEE MORE:

 ATF Cooler Pipe and Hose

A: REMOVAL 1) Remove the collector cover. NOTE: Follow the steps below when removing the collector cover. Pull up the two points at the rear (A). Pull up the two points at the front (B) while moving them forward. 2) Remove the battery. 3) Lift up the vehicle. 4) Remove the under cover. <R

 GVWR and GAWR (Gross Vehicle Weight Rating and Gross Axle Weight Rating)

Certification label The certification label attached to the driver’s side door shows GVWR (Gross Vehicle Weight Rating) and GAWR (Gross Axle Weight Rating). The GVW (Gross Vehicle Weight) must never exceed the GVWR. GVW is the combined total of weight of the vehicle, fuel, driver, all pass

© 2010-2024 Copyright www.suoutback.com