Subaru Outback (BR): Tether anchorage location
Subaru Outback (BR) 2010-2015 Owners Manual / Seat, seatbelt and SRS airbags / Child restraint systems / Top tether anchorages / Tether anchorage location
Outback
Three tether anchorages, i.e., ones for the right, center and left positions, are already installed on the rear edge of the roof. Open the cover flap to use each anchorage.
READ NEXT:
To hook the top tether
CAUTION
Always remove the head restraint when mounting a child restraint system with
a top tether. Failure to do so may prevent the top tether from being fastened tightly.
Outback
1. Remove the
*SRS airbag (Supplemental Restraint System airbag)
*SRS: This stands for supplemental restraint system. This name is used because
the airbag system supplements the vehicle’s seatbelts.
Your vehicle is equipped with a crash sensing and diagnostic
Models with SRS airbags and lap/shoulder restraints for driver, front passenger,
and window-side rear passengers
Your vehicle is equipped with a supplemental restraint system in addition to
a lap/shoulder belt at each front seating position and each rear window-side seating
position. The supplemental restrai
SEE MORE:
Emergency brake
CAUTION
Use the emergency brake only in case of an emergency. If the emergency brake
is excessively used, the brake parts will wear down faster or the brake may not
work sufficiently due to rear wheel brake overheating.
NOTE
While using the emergency brake, the brake system warning light and
Stop Light Switch
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover.
Remove the clips, and remove the instrument panel side cover LH.
Remove the clips and data link connector, and remove the instrument
panel lower cover under.
Remove the bolts, and remove
© 2010-2024 Copyright www.suoutback.com
