Subaru Outback manuals

Subaru Outback (BR): Folding down the rear seatback

WARNING

● When you fold down the seatback, check that there are no passengers or objects on the rear seat. Not doing so creates a risk of injury or property damage if the seatback suddenly folds down.

● Never allow passengers to ride on the folded rear seatback or in the cargo area or trunk. Doing so may result in serious injury or death.

● Secure all objects and especially long items properly to prevent them from being thrown around inside the vehicle and causing serious injury during a sudden stop, a sudden steering maneuver or a rapid acceleration.

● When you return the seatback to its original position, shake the seatback slightly to confirm that it is securely fixed in place. If the seatback is not securely fixed in place, the seatback may suddenly fold down in the event of sudden braking, or objects may move out from the cargo area, which could cause serious injury or death.

● After returning the rear seat to its original position, be certain to place all of the seatbelts and the tab attached to the seat cushion above the seat cushion. Also, make certain that the shoulder belts are fully visible.

CAUTION

The rear seatback may fold down quickly due to the internal spring. Hold the seatback while pulling the release lever to slow it down.

Unlock the seatback by pulling the release lever and then fold the seatback down.

 

Unlock the seatback by pulling the release lever and then fold the seatback down. To return the seatback to its original position, raise the seatback until it locks into place and make sure that it is securely locked.

READ NEXT:

 Rear window side seating position

  1) Head restraint 2) Release button To raise: Pull the head restraint up. To lower: Push the head restraint down while pressing the release button on the top of the seatback. To remove

SEE MORE:

 ABS Sequence Control

A: OPERATION 1) While the ABS sequence control is being performed, the operation of the hydraulic unit can be checked using the brake tester or pressure gauge after the hydraulic unit solenoid valve operation. 2) ABS sequence control can be started by the Subaru Select Monitor. 1. ABS SEQUENCE CO

 General Description of Transmission Control Systems

A: COMPONENT 1. AT SELECT LEVER Cover grip AT Button ASSY-AT Clamp grip pin Grip ASSY sub Rod COMPL Cover grip AT Indicator ASSY Arm ASSY Selector lever COMPL Plate guide Rod detent Detent spring Clamp push nut Clamp push nut

© 2010-2025 Copyright www.suoutback.com