Subaru Outback (BR): Measuring and adjusting air pressure to achieve proper inflation
Subaru Outback (BR) 2010-2015 Owners Manual / Consumer information and Reporting safety defects / Tire information / Recommended tire inflation pressure / Measuring and adjusting air pressure to achieve proper inflation
Check and, if necessary, adjust the pressure of each tire (including the spare) at least once a month and before any long journey. Check the tire pressures when the tires are cold. Use a pressure gauge to adjust the tire pressures to the specific values. Driving even a short distance warms up the tires and increases the tire pressures. Also, the tire pressures are affected by the outside temperature. It is best to check tire pressure outdoors before driving the vehicle. When a tire becomes warm, the air inside it expands, causing the tire pressure to increase. Be careful not to mistakenly release air from a warm tire to reduce its pressure.
READ NEXT:
Glossary of tire terminology
● Accessory weight
The combined weight (in excess of those standard items which may be replaced)
of automatic transmission, power steering, power brakes, power windows, power seats,
radio,
Tire care – maintenance and safety practices
● Check on a daily basis that the tires are free from serious damage, nails,
and stones. At the same time, check the tires for abnormal wear.
● Inspect the tire tread regularly and repl
Vehicle load limit – how to determine
The load capacity of your vehicle is determined by weight, not by available cargo
space. The load limit of your vehicle is shown on the vehicle placard attached to
the driver’s side B-pillar. Lo
SEE MORE:
Occupant Detection System (Diagnostics)
Basic Diagnostic Procedure
A: PROCEDURE
Check List for Interview
A: CHECK
General Description
A: CAUTION
1) If the seat cushion cover is removed or replaced,
make sure to perform the occupant detection system
adjustment after installing the seat to the vehicle.
<Ref. to OD(diag)-15, System Cal
Coolant temperature low indicator light/Coolant temperature high warning light
CAUTION
● After turning the ignition switch to the “ON” position, if this indicator light/warning
light behaves under any of the following conditions, the electrical system may be
malfunctioning. Contact your SUBARU dealer immediately for an inspection.
– It remains blinking in RED
© 2010-2025 Copyright www.suoutback.com
