Subaru Outback (BR): Electrical system
Subaru Outback (BR) 2010-2015 Owners Manual / Specifications / Electrical system
READ NEXT:
Tires specification in the table
*1: This torque is equivalent to applying approximately 88 to 110 lbf (40 to 50 kgf) at the end of the wheel nut wrench. If you have tightened the wheel nuts by yourself, have the tighteni
Wheel alignment
Item
Legacy
Outback
2.5 L non-turbo models
Except 2.5 L non-turbo models
SEE MORE:
Instrument Panel Assembly
A: REMOVAL
CAUTION:
Be careful not to damage the airbag system harness when servicing the instrument
panel. Damage
may cause the system to malfunction.
1) Disconnect the ground cable from battery.
2) Remove the console front cover assembly.
MT model
1. Remove the shift knob.
2. Release the cli
Rear Wiper Arm
A: REMOVAL
1) Pull up the wiper arm cover.
2) Remove the nut and remove the wiper arm.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Operate the rear wiper once.
3) Align the blade with the marking on the glass.
Tightening torque:
Refer to "COMPONENT" of "General Description".
© 2010-2024 Copyright www.suoutback.com
