Subaru Outback (BR): Climate control panel, audio panel, instrument panel, console panel, switches, combination meter, and other plastic surface
Subaru Outback (BR) 2010-2015 Owners Manual / Appearance care / Cleaning the interior / Climate control panel, audio panel, instrument panel, console panel, switches,
combination meter, and other plastic surface
Use a soft, damp cloth to clean the climate control panel, audio equipment, instrument panel, center console, combination meter panel, and switches.
NOTE
Do not use organic solvents such as paint thinners or gasoline, or strong cleaning agents that contain those solvents.
READ NEXT:
Navigation monitor (if equipped)
To clean the navigation monitor, wipe it with a silicone cloth or with a soft
cloth. If the navigation monitor is extremely dirty, clean it with a soft cloth
moistened with neutral detergent then
Maintenance schedule
The scheduled maintenance items required to be serviced at regular intervals
are shown in the “Warranty and Maintenance Booklet”.
For details about your maintenance schedule, read the separate
SEE MORE:
Dome light remove bulb
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.
2. Turn the bulb until the flat surfaces at its ends are aligned vertically.
3. Pull the bulb straight downward to remove it.
4. Install a new bulb.
5. Reinstall the lens.
Cylinder Head
A: REMOVAL
NOTE:
When replacing a single part, perform the work
with the engine assembly installed to body. Refer to
"Valve Clearance" for preparation procedures.
<Ref. to ME(H4SO)-29, Valve Clearance.>
When performing the work with the engine installed
to body, the following parts must
© 2010-2024 Copyright www.suoutback.com
