Subaru Outback manuals

Subaru Outback (BR): Vehicle capacity weight


The load capacity of your vehicle is determined by weight, not by available cargo


The load capacity of your vehicle is determined by weight, not by available cargo space. The maximum load you can carry in your vehicle is shown on the vehicle placard attached to the driver’s side door pillar. It includes the total weight of the driver and all passengers and their belongings, any optional equipment such as a trailer hitch, roof rack or bike carrier, etc., and the tongue load of a trailer.

READ NEXT:

 GVWR and GAWR (Gross Vehicle Weight Rating and Gross Axle Weight Rating)

Certification label The certification label attached to the driver’s side door shows GVWR (Gross Vehicle Weight Rating) and GAWR (Gross Axle Weight Rating). The GVW (Gross Vehicle Weight) must

 Roof rails with integrated crossbars (Outback)

1) Integrated crossbars CAUTION ● For cargo carrying purposes, the bars must be used as crossbars and be used together with the genuine SUBARU carrying attachment. The bars must never be u

 Installing carrying attachments on the crossbars

When installing any carrying attachment such as a bike carrier, ski carrier, kayak carrier, cargo basket, etc. on the crossbars, follow the manufacturer’s instructions and make sure that the att

SEE MORE:

 Rear Wiper Arm

A: REMOVAL 1) Pull up the wiper arm cover. 2) Remove the nut and remove the wiper arm. B: INSTALLATION 1) Install in the reverse order of removal. 2) Operate the rear wiper once. 3) Align the blade with the marking on the glass. Tightening torque: Refer to "COMPONENT" of "General Description".

 Roof Molding

A: REMOVAL CAUTION: Be careful not to damage the body. 1) Remove the roof rail assembly. (OUTBACK model) <Ref. to EI-59, REMOVAL, Roof Rail.> 2) Turn over the front end of roof molding. 3) Using a flat tip screwdriver, slide the internal clip in the direction of arrow. Right: Slide toward

© 2010-2024 Copyright www.suoutback.com