Subaru Outback (BR): Snow tires
WARNING
● When replacing original tires with winter (snow) tires, make sure you use only the same size, construction and load range as the original tires listed on the tire placard. Using other sizes and construction may affect speedometer/ odometer calibration and clearance between the body and tires. It also may be dangerous and lead to loss of vehicle control.
● You must install four winter tires that are of the same size, circumferences, construction, brand, and load range. Mixing other sizes, circumferences or constructions may result in severe mechanical damage to the drive train of your vehicle and may affect ride, handling, braking and speedometer/odometer calibration. It also may be dangerous and lead to loss of vehicle control.
● Do not use a combination of radial, belted bias or bias tires since it may cause dangerous handling characteristics and lead to an accident.
READ NEXT:
Except 2.5 L turbo models
Your vehicle is equipped with “all season tires” which are designed to provide
an adequate measure of traction, handling and braking performance in year-round
driving. In winter, it may be pos
Winter driving on 2.5 L turbo models
Original equipment summer tires are installed on your vehicle, which are not suitable for driving on slippery surfaces like snow-covered or icy roads. Compared to winter and all-season tires, summer t
Tire chains
CAUTION
Tire chains cannot be used on any tires for your Legacy and Outback because of
lack of clearance between the tires and vehicle body.
SEE MORE:
Driver’s seat
1) Seat position forward/backward control switch
To adjust the seat forward or backward, move the control switch forward or backward.
During forward/backward adjustment of the seat, you cannot adjust the seat cushion
angle or seat cushion height.
2) Seat cushion angle control switch
To adju
Reduction Driven Gear
A: REMOVAL
1) Remove the transmission from the vehicle. <Ref. to CVT-55, REMOVAL,
Automatic Transmission Assembly.>
2) Remove the extension case. <Ref. to CVT-138, REMOVAL, Extension Case.>
3) Remove the rear drive shaft. <Ref. to CVT-141, REMOVAL, Rear Drive Shaft.>
4) Remove
