Subaru Outback (BR): Power steering
Subaru Outback (BR) 2010-2015 Owners Manual / Starting and operating / Power steering
CAUTION
Do not hold the steering wheel at the fully locked position left or right for more than 5 seconds. This may damage the power steering pump.
The power steering system operates only when the engine is running.
If you lose power steering assist because the engine stops or the system fails to function, you can steer but it will take much more effort.
NOTE
Right after the engine has been started and before it has warmed up, you may hear a noise coming from areas adjacent to the power steering pump which is located at the right-front area of the engine compartment. This noise is normal. It does not indicate power steering system trouble.
READ NEXT:
Braking tips
WARNING
Never rest your foot on the brake pedal while driving. This can cause dangerous
overheating of the brakes and needless wear on the brake pads and linings.
When the brakes get wet
When driving in rain or after washing the vehicle, the brakes may get wet. As
a result, brake stopping distance will be longer. To dry the brakes, drive the vehicle
at a safe speed while lightly d
SEE MORE:
High/low beam change (dimmer)
To change from low beam to high beam, push the turn signal lever forward. When
the headlights are on high beam, the high beam indicator light “”
on the combination meter is also on.
To switch back to low beam, pull the lever back to the detent position.
Rear Seat
A: REMOVAL
1. SEDAN MODEL
1) Remove the rear seat cushion.
Pull up the seat cushion and release the hook.
CAUTION:
If the hook is removed from vehicle body, replace the hook with the new part to
avoid the deterioration
of seat securing.
Remove the hook (A) by pushing it back while lifting th
© 2010-2024 Copyright www.suoutback.com
