Subaru Outback (BR): R (Reverse)
This position is for backing the vehicle. To shift from the “N” to “R” position, stop the vehicle completely then move the lever to the “R” position.
READ NEXT:
N (Neutral)
This position is for restarting a stalled engine.
In this position the wheels and transmission are not locked. In this position,
the transmission is neutral; the vehicle will roll freely, even on t
D (Drive)
This position is for normal driving. The transmission automatically shifts into
a suitable gear according to the vehicle speed and the acceleration you require.
When more acceleration is required
Shift lock function
The shift lock function helps prevent the improper operation of the select lever.
● The select lever cannot be operated unless the ignition switch is turned to
the “ON” position and the b
SEE MORE:
Tilting moonroof
1) Raise
2) Lower
The raising function will only operate when the moonroof is fully closed. The
lowering function will only operate when the moonroof is raised.
Press the rear side of the “UP/DOWN” switch to raise the moonroof. Press the
front side of the “UP/DOWN” switch to lower t
Remote Openers
A: REMOVAL
1. FRONT HOOD OPENER
1) Remove the opener lever.
Remove the cable.
Remove the nut, and detach the opener lever.
2) Remove the following parts and remove the cable clip and cable.
Front hood lock ASSY: <Ref. to SL-51, REMOVAL, Front Hood Lock
Assembly.>
Instrument panel low
© 2010-2024 Copyright www.suoutback.com
