Subaru Outback (BR): Starting the engine
Subaru Outback (BR) 2010-2015 Owners Manual / Starting and operating / Starting the engine
READ NEXT:
MT models
1. Apply the parking brake.
2. Turn off unnecessary lights and accessories.
3. Depress the clutch pedal to the floor and shift the shift lever into neutral.
Hold the clutch pedal to the floor whil
AT and CVT models
CAUTION
If you restart the engine while the vehicle is moving, shift the select lever
into the “N” position. Do not attempt to place the select lever of a moving vehicle
into the “P” posi
Stopping the engine
WARNING
Do not stop the engine when the vehicle is moving. This will cause loss of power
to the power steering and the brake booster, making steering and braking more difficult.
It could also res
SEE MORE:
Checking the coolant level
Check the coolant level at each fuel stop.
1. Check the coolant level on the outside of the reservoir while the engine is
cool.
2. If the level is close to or lower than the “LOW” level mark, add coolant up to
the “FULL” level mark. If the reserve tank is empty, remove the radiator c
Synthetic oil
You should use synthetic engine oil that meets the same requirements given for
conventional engine oil. When using synthetic oil, you must use oil of the same
classification, viscosity and grade shown in this Owner’s Manual. Refer to “Engine
oil” F12-4. Also, you must follow the oil and
© 2010-2024 Copyright www.suoutback.com
