Subaru Outback (BR): “up” and “down” switch
With radio mode selected
Press the switch to the “
” or “
”
side briefly to skip to a preset channel. Press the switch to the “”
or “” side for more than 0.5 second
to seek the next receivable station and stop at it.
That station’s frequency will be indicated on the audio display.
With CD mode selected
Press the switch to the “” side
to skip forward in the track/file (track) order. Press the switch to the “”
side to skip back ward in the track/file (track) order. The track/file (track) number
will be shown on the audio display.
With SAT mode selected
Press the switch to the “” side
to skip forward in the channel order. Press the switch to the “”
side to skip backward in the channel order. When the switch is briefly pressed,
the channel will skip every 1 channel. When the switch is pressed for more than
0.5 second, the channel will skip every 10 channels. The channel will be shown on
the audio display.
READ NEXT:
Volume control switch
Press the switch to the “+” side to increase the volume. Press the switch to
the “−” side to reduce the volume. A number indicating the volume will be shown
on the audio display.
MUTE button (if equipped)
Press this button if you wish to immediately cut the volume to zero.
The audio display will show “MUTE”. If you press the button again, the original
sound volume will return and “MUTE” tu
Hands-free system (if equipped)
NOTE
● For models with the genuine SUBARU navigation system, refer to the Owner’s
Manual supplement for the navigation system.
● When selling your vehicle, make sure that you initial
SEE MORE:
Rear view image display
When the ignition switch is in the “ON” position and the transmission is in the
“R” (reverse) position, the rear view camera automatically displays the rear view
image behind the vehicle on the inside mirror. Also, the following help lines are
indicated as a guide to help you realize t
Air Mix Door Actuator
A: REMOVAL
1. DRIVER'S SEAT
1) Remove the instrument panel lower cover. <Ref. to EI-64, REMOVAL,
Instrument Panel Lower Cover.>
2) Remove the bolts, and remove the knee guard panel.
3) Remove the body integrated unit.
CAUTION:
Be careful to keep water and other foreign materials away from b
