Subaru Outback (BR): Replacing an air filter

Subaru Outback (BR) 2010-2015 Owners Manual / Climate control / Air filtration system / Replacing an air filter

1. Remove the glove box.

(1) Open the glove box.

(2) Remove the damper shaft from the glove box.

(3) Pull out the glove box.

2. Remove the cover of the air filter.

3. Remove the air filter.

4. Replace the air filter element with a new one.

5. Reinstall the cover of the air filter.

CAUTION

The arrow mark on the filter must point UP.

6. Reinstall the glove box, and connect the damper shaft.

7. Close the glove box.

8. LABEL installation

(1) Fill out the information on the service label (small).

1) Service label

(2) Attach the service label to the driver’s side door pillar.

1) Caution label

(3) Attach the caution label on the driver’s side of the instrument panel as shown in the illustration.

SEE MORE:

Seatbelt and SRS airbag

WARNING ● All persons in the vehicle should fasten their seatbelts BEFORE the vehicle starts to move. Otherwise, the possibility of serious injury becomes greater in the event of a sudden stop or accident. ● To obtain maximum protection in the event of an accident, the driver and a

Wheel balance

Each wheel was correctly balanced when your vehicle was new, but the wheels will become unbalanced as the tires become worn during use. Wheel imbalance causes the steering wheel to vibrate slightly at certain vehicle speeds and detracts from the vehicle’s straight-line stability. It can also

Subaru Outback (BR): Replacing an air filter

READ NEXT:

Audio

Antenna system

Printed antenna

SEE MORE:

Seatbelt and SRS airbag

Wheel balance