Setting passkey
1. Select the “SET PASSKEY” menu.
After the currently set passkey is displayed, a new passkey can be entered.
2. Input the new passkey by operating the “TUNE/TRACK/CH” dial or saying the passkey.
3. Select the “CONFIRM” menu. The new passkey is displayed, the passkey is changed and the mode changes to the “PHONE SETUP” mode.
See also:
Gross Axle Weight (GAW) and Gross Axle Weight Rating (GAWR)
Gross Axle Weight
The total weight applied to each axle (GAW) must never exceed the Gross Axle
Weight Rating (GAWR). The front and rear GAWs can be adjusted by relocating passengers
and luggage ...
Trunk light (Legacy)
1. Push both sides of the light cover, and then remove the cover by pulling it
out.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall the cover. ...
When the brakes get wet
When driving in rain or after washing the vehicle, the brakes may get wet. As a result, brake stopping distance will be longer. To dry the brakes, drive the vehicle at a safe speed while lightly depre ...