Registering from call back

1. Select the “CALL BACK” menu.

2. Select the phone number by operating the “TUNE/TRACK/CH” dial.

3. Select the “STORE” menu.

4. Select the “CONFIRM” menu.

5. Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial or press the talk switch 6. Say the name (voice tag) to be.

6. Say the name (voice tag) to be registered.

7. Select the “CONFIRM” menu. Then “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial”.

    See also:

    Channel scan
    Press the “SCAN” button briefly (type A, B and C audio)/for more than 1.5 seconds (type D audio) to change the radio to the SCAN mode. In this mode, under the selected category, the radio sc ...

    Key number
    1) Key number plate 2) Security ID plate The key number is stamped on the key number plate attached to the key set. Write down the key number and keep it in another safe place, not in the vehicle ...

    Rear window wiper blade assembly
    1. Raise the wiper arm off the rear window. 2. Turn the wiper blade assembly counterclockwise. 3. Pull the wiper blade assembly toward you to remove it from the wiper arm. 4. Install the wi ...