See also:

Fuel
Use of a fuel which is low in quality or use of an inappropriate fuel additive may cause engine damage. ...

High mount stop light (4- door) (except LED [Light Emitting Diode] type)
1. Remove the high mount stop light cover by prying the edge with a screwdriver. 2. Remove the bulb socket from the high mount stop light assembly by turning it counterclockwise. 3. Pull the bulb ...

Immobilizer system
This light blinks approximately 60 seconds after the ignition switch is turned from “ON” position to the “Acc” or “LOCK” position or immediately after the key is pulled out. Refer to “Immobilizer” ...