Subaru Outback (BR): Fuse panel located in the passenger compartment
READ NEXT:
NOTE
Lights A and B are the LED (Light Emitting Diode) type. Consult your SUBARU dealer
for replacement.
WARNING
Bulbs may become very hot while illuminated. Before replacing bulbs, turn of
1) Emission control label
2) Vehicle identification number
3) Certification and bar code label
4) Tire inflation pressure label
5) Vehicle identification number plate
6) Model number label
7)
SEE MORE:
Certification label
The certification label attached to the driver’s side door shows GVWR (Gross
Vehicle Weight Rating) and GAWR (Gross Axle Weight Rating).
The GVW (Gross Vehicle Weight) must never exceed the GVWR. GVW is the combined
total of weight of the vehicle, fuel, driver, all pass
A: REMOVAL
1) Pull up the wiper arm cover.
2) Remove the nut and remove the wiper arm.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Operate the rear wiper once.
3) Align the blade with the marking on the glass.
Tightening torque:
Refer to "COMPONENT" of "General Description".
© 2010-2024 Copyright www.suoutback.com